9M6DXX Steve reports home

Created on Monday, 09 February 2009

dsc03595I'm back home now (late Monday morning local time) after 2 nights at an Inn on the coast, where John, 9M6XRO, and I put up an inverted-L for 160m and a Butternut HF6 for 80 - 10m. John has been operating almost exclusively 160m CW while I was on 80, 40 and 20m SSB. John is staying at the QTH for another 2 nights and will also be doing some
80m CW and possibly 30m, as well as 160m.

There is a massive tidal range at this QTH and the feedpoint of the 160m inverted-L was inches above the sea at high tide. The HF6 feedpoint was literally underwater the first night (and it has probably ruined the HF6 20m coax matching stub!) but we moved the antenna to a more elevated position for the 2nd night of operating.

Unfortunately, 80m in particular was very disappinting due to local noise at that site. The noise is S9 or over on the FT-1000MP S-meter and the two noise blankers do absolutely nothing to reduce it. At times I knew I had many stations calling on 80m, but I just could not copy them through the crud.

John, on the other hand, had a great time on topband and made 300 QSOs at his first sitting, mainly JA and Europe, and another 300 last night, mainly EU.

We discovered by accident this morning that the 160m inverted-L was a much quieter receive antenna on 80m than the HF6. John is rigging up a way of using the 160m inverted-L as an RX-only antenna on 80m for this evening, so he may have a lot more success than me.

GL to anyone needing 9M6 on the low bands. 73, Steve, 9M6DXX

Thursday the 17th. Web Design and Web Hosting.
Copyright 2014

©